Professional Mold Remediation Services in Burnaby, BC
Professional mold remediation services in Burnaby, BC involve far more than wiping down a surface. Proper mold remediation means containing the affected area, establishing negative air pressure, removing or treating mold-affected materials, applying EPA-approved biocides, and verifying the result with third-party air testing. Our mold removal contractor team follows IICRC S520 — the industry standard used by insurers, building inspectors, and property managers across Canada.
Why bleach doesn't work on porous materials
The most common mold remediation mistake is treating wood, drywall, or insulation with bleach. Bleach is roughly 90–95% water. On a porous surface, the chlorine evaporates off the top while the water component penetrates deeper — feeding the mold roots embedded in the material. You get a temporary whitening of the surface while the mycelium continues growing underneath. Professional mold remediation services use EPA-approved biocides specifically formulated for porous materials, applied after mechanical removal.
What IICRC S520 compliance means for your job
The IICRC S520 standard is the benchmark for professional mold remediation published by the Institute of Inspection Cleaning and Restoration Certification. It defines containment requirements, personal protective equipment standards, the sequence of work, and clearance criteria. When your mold remediation contractor follows S520, the job is done to the same standard that insurance adjusters, property managers, lenders, and building inspectors expect and recognize. It's also what makes your clearance certificate credible.
What happens to the removed material
Mold-affected materials removed from your home — drywall, insulation, contaminated wood — are double-bagged in sealed polyethylene bags before being transported out of the containment area. This prevents cross-contamination to unaffected areas. Materials are disposed of per local requirements. In Burnaby and Metro Vancouver, all disposal follows WorkSafeBC and Metro Vancouver guidelines for contaminated waste.
Containment and negative air pressure — what it means
Before any material is disturbed, the work area is isolated with polyethylene sheeting and sealed with tape. A HEPA air scrubber creates negative air pressure inside the containment zone — meaning air flows in but cannot escape without passing through the HEPA filter. This keeps spores from migrating to the rest of your home during active remediation work. It's a non-negotiable step for any job beyond a tiny surface patch.
What's Included
- Full containment with polyethylene sheeting and negative air pressure
- HEPA air scrubbers running continuously during work
- Safe removal of affected drywall, insulation, or materials as required
- Mechanical mold removal (HEPA vacuuming, hand tools, wire brushing where appropriate)
- Application of EPA-approved biocide to all affected surfaces
- Double-bagging and disposal of all mold-contaminated materials
- Final HEPA vacuum and wipe-down of work area
- Post-remediation cleaning and decontamination of equipment
- Third-party clearance testing arranged if required
When to Call Us for Mold Remediation
- Confirmed mold growth on drywall, wood framing, or structural materials
- Mold behind walls, under flooring, or inside ceiling cavities
- Widespread mold after a water damage event
- Pre-sale remediation required by a buyer or lender
- Rental property with tenant health complaints requiring documented response
- Mold discovered during renovation work
How We Do It
- 1On-site inspection to confirm full scope before work begins
- 2Containment area established and sealed from the rest of the home
- 3Negative air pressure set up with HEPA air scrubbers
- 4Mold mechanically removed using HEPA vacuums and hand tools
- 5Biocide applied to all affected and adjacent surfaces
- 6Surfaces dried and verified before containment removal
- 7Final HEPA vacuum and wipe-down of the work area
- 8Third-party air quality test arranged to confirm clearance
We provide mold remediation in Burnaby and surrounding Metro Vancouver communities including New Westminster, Coquitlam, Port Coquitlam, Port Moody and more. See all areas we serve →
Mold Remediation — Common Questions
Straightforward answers to what people usually ask us.
Need Mold Remediation in Burnaby?
Give us a call or fill out the form. We'll get a certified technician to you quickly for mold remediation services.
Available 24 hours a day, every day of the year.